BGPVD - D-A HYDRATRANS 135
- MSDS: BGPVD
- Manufacturer: D A LUBRICANT CO INC
- Product Name: D-A HYDRATRANS 135
- National Stock Number: 9150-01-177-9438
Product Identification
Product ID:D-A HYDRATRANS 135
MSDS Date:11/11/1985
FSC:9150
NIIN:01-177-9438
MSDS Number: BGPVD
Responsible Party
INDIANAPOLIS, IN 46208
US
Emergency Phone: (317) 923-5321
Cage: 30719
Contractor
Telephone: 317-923-5321/216-391-8300 OTHER HRS
Cage: 30719
Ingredients
PETROLEUM BASED LUBRICANT
ACGIH TLV: 5MG/CUM(MIST)
SOLVENT REFINED;HYDROTREATED PARAFFINIC BASE OIL
ACGIH TLV: 5MG/CUM(MIST
ADDITIVES MIXTURE(AS DETERGENT,DISPERSANT,ANTIOXIDANT,AND
Hazards
Effects of Overexposure:EYES:MAY CAUSE SLIGHT IRRIT;SKIN:MILD IRRIT ON
REPEATD CONTACT;INHAL/INGEST:LOW TOXICITY
First Aid
First Aid:SKIN:WASH W.SOAP & H*2O. EYES:FLUSH W. H*2O. INGESTED:DON'T
INDUCE VOMITING. INHALED:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NEED. KEEP WARM & QUIET. REMOVE CONTAMINATED CLOTHING. NEVER GIVE
ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.
Fire Fighting
Flash Point:430F/221C (COC)
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:WHEN HEATED ABOVE FLASH PT,VAPOR RELEASED
COULD CREATE AN EXPLOSIVE ATMOSPHERE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION AROUND SPILL
AREA. CLEAN UP SPILL AS SOON AS POSSIBLE.USE ABSORBENT SUCH AS CLAY
OR DIATOMACEOUS EARTH TO CLEAN UP SPILL.
Handling
Handling and Storage Precautions:STORE AWAY FROM OPEN FLAME.
Exposure Controls
Respiratory Protection:NOT NORMALL,UNLESS OIL MIST ABOVE TLV.
Ventilation:NONE
Protective Gloves:IMPERVIOUS.
Eye Protection:GOGGLES/FACE SHIELD
Supplemental Safety and Health
MSDS FROM D-A LUBRICANT CO DATED:11/11/85.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>550F/>288C
Vapor Density:>8
Spec Gravity:0.879
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT BROWN LIQUID,OIL ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT.
Hazardous Decomposition Products:CO,OXIDES OF
CALCIUM,ZINC,PHOSPHOROUS,&H*2S.
Disposal
Waste Disposal Methods:DISPOSE OF CONTAMINATED MATL IN AN APPROVED
DISPOSAL SITE. WASTE OIL CAN BE DISPOSED OF BY CONTROLLED
INCINERATION OR OTHER APPROVED METHED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.